Dell OptiPlex VDI Blaster Edition Administration Manual page 45

Using the Join a Domain or Workgroup Wizard
The Join a Domain or Workgroup Wizard may also be used to join a domain or
workgroup. It presents a series of questions and information boxes about your
network and configures the system accordingly.
1
Select Start->Control Panel->System and Security -> System.
2
Under the Computer name, domain, and workgroup settings category,
click Change settings.
On the Computer Name tab, click the Network ID... button. The Join a
3
Domain or Workgroup Wizard will appear.
4
Answer the questions to configure your Domain or Workgroup. Click
Finish and reboot your terminal to apply the changes you have made.
Networking | 45