Installing MUI Packs
You may install MUI (Multilingual User Interface) packs to enable the operating
system to support different languages and language settings on your terminal as
needed. The MUI pack installation file can not be located on the DOM, it must
be installed from an external drive or over the network due to disk size
limitations.
NOTE: Installing a MUI pack will reboot the system, so be sure to save and close all
programs before starting the process to avoid losing your work.
To install a MUI pack:
1.
Log-in as an Administrator. Click Start->All Programs->FBWFGUI.
2.
Temporarily disable the write filter by clicking the Disable FBWF
button, and press the Apply button.
3.
Reboot the terminal.
4.
Log back in as an Administrator.
5.
Launch the MUI installer for the desired language.
6.
Click on Run in the security warning screen.
Understanding Your Thin Client | 17