Installing A Scanner Or Camera - Dell OptiPlex VDI Blaster Edition Administration Manual

Windows embedded standard 7 (wes7) - administration guide
Hide thumbs Also See for OptiPlex VDI Blaster Edition:
Table of Contents

Advertisement

4
Select Add a printer. The wizard will begin. Decide if the printer will
be local or a network printer. Depending on the printer, you may have to
deselect the Plug and Play check box to continue.
5
Pick the connection type or port name and click Next. The printer should
be listed in the box. Click the printer and then click Have Disk. Browse
through your terminal and select the correct driver for your printer. After
it is highlighted, click OK to install the driver.
NOTE: When you install drivers for any hardware connected to your thin client, make
sure you use the correct and most recent drivers. Older drivers may not be compatible
with the software.

Installing a Scanner or Camera

1
Power the scanner or camera on and plug the USB cord into the photo
device and into the terminal. Depending on the model, your device may
install automatically.
2
If the device is not Plug and Play ready, you may have to install the
drivers manually. You can insert a USB flash drive or a CD on an
external drive that contains the device's drivers into the terminal. If you
do not have the drivers available on a media device, search the
manufacturer's website and download the correct driver that is
compatible with your scanner or camera model and the operating system.
3
Connect your scanner or camera to the terminal using a USB cord. Your
operating system should recognize the new hardware. If not, select
Start->Control Panel->Devices and Printers. A wizard will guide you
through the installation process.
NOTE: If the device comes with its installation files on a CD, there are ways
you can install them onto your terminal. The easiest way is to use a Plug and
Play CD-ROM. Another way is to use a second thin client and copy the entire
installation folder from the CD onto a USB storage device. You can then use
this USB device in the terminal. Also, you can search the manufacturer's
website for the correct drivers for your device.
Installing or Removing Peripherals | 37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiplex vdi blaster

Table of Contents