HP dx2358 - Microtower PC Service & Reference Manual page 11

3. A choice of headings appears in the Computer Setup Utilities menu: Main, Advanced,
Power, Boot and Exit.
4. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and
down) keys to select the option you want, then press
Utilities menu, press
5. To apply and save changes, select Save Setting and Exit.
❏
If you have made changes that you do not want applied, select Exit Without Saving.
❏
To reset to factory settings, select Load Defaults Setting. This option will restore the
original factory system defaults. You must still select Save Setting and Exit after
resetting the defaults.
Ä
CAUTION: Do NOT turn the computer power OFF while the ROM is saving your F10 Computer Setup
changes because the CMOS could become corrupted. It is safe to turn off all power to the computer after
you exit the F10 Setup screen.
Service Reference Guide
Esc
.
489243-001
Setup Utilities and Diagnostics Features
Enter
. To return to the Computer Setup
2–3