HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 242
Proliant server troubleshooting guide
Hide thumbs
Also See for 1850R - ProLiant - 128 MB RAM:
- Reference manual (138 pages) ,
- Implementation manual (35 pages) ,
- Overview (20 pages)
Table of Contents
Advertisement
POST Error Messages
Table C-13: 1700 Series POST Error Messages
Error Code
1783-Slot X Drive
Array Controller
Failure.
1783-Intelligent Drive
Array Controller
Failure
1784-Slot X Drive
Array Drive Failure.
The following SCSI
drive(s) should be
replaced:
SCSI Port Y:
SCSI ID Z:
C-62
Audible
Probable Source of
Beeps
Problem
None
Bad controller. If this
message is displayed
after Options ROMPaq is
run, problems may have
occurred while attempting
to flash the ROM.
None
Integrated Array
Controller firmware is
corrupt, or IAC is bad or
has failed.
None
Defective drive and/or
SCSI cables detected.
continued
Action
Reseat the array accelerator
module if detached. Try
reseating the controller in the
PCI slot. Otherwise, replace
the array controller.
1.
Be sure that integrated
array controller ROM
firmware is up to date.
2.
Replace I/O board.
Check for loose cables. Be
sure that all drives are fully
seated in drive bay slots.
Replace defective drive X
and/or cable(s).
HP Servers Troubleshooting Guide
continued
Advertisement
Table of Contents
Troubleshooting
