Closing The System - Dell PowerEdge R210 Hardware Owner's Manual

Figure 3-3. Opening and Closing the System Cover
1 latch release lock

Closing the System

1 Place the cover onto the chassis and offset it slightly toward the back of the
system, so that the two hooks on the back edge of the cover fit over the
corresponding slots on the back edge of the chassis. See Figure 3-3.
2 Slide the cover toward the front of the chassis till it snaps in position.
3 Rotate the latch release lock in a clockwise direction to secure the cover.
1
2
Installing System Components
indent
2
63