Initial Setup Menu; Selecting Other Languages; Hdmi Control; Auto Power Off - Onkyo DV-CP706S Instruction Manual

Instruction manual
Table of Contents

Advertisement

Configuring the DV-CP706—Continued

HDMI Control

With this setting, you can turn RIHD control over HDMI
on or off.
RIHD control on.
On (default):
RIHD control off.
Off:
Notes:
• RIHD (Remote Interactive over HDMI) is Onkyo's
implementation of CEC (Consumer Electronics Con-
trol), which allows integrated system control over
HDMI and is part of the HDMI standard. In addition
to Onkyo AV components, it allows interoperability
with CEC-compatible AV components and TVs made
by other manufacturers. However, operation with
components other than RIHD-compatible components
or recommended components cannot be guaranteed.
• Select Off if a connected component is incompatible
or you're not sure about its compatibility.
• If operation is unreliable when set to On, select Off
instead.

Power Control

With this setting, you can turn RIHD power control over
HDMI on or off.
RIHD power control on.
On (default):
RIHD power control off.
Off:
Notes:
• The Power Control setting can be set only when the
HDMI Control setting is set to On.
• When set to On, the DV-CP706 can be turned on or off
automatically along with the other RIHD-compatible
components in the system.
• HDMI power control only works with RIHD-compat-
ible components that support it and may not work
properly with some components due to their settings
or compatibility.
• When set to On, the DV-CP706 consumes more
power.
• When set to On, the DV-CP706 enters Standby mode
and the STANDBY indicator lights up.

Direct Change

With this setting, you can turn RIHD direct change over
HDMI on or off.
RIHD direct change on.
On (default):
RIHD direct change off.
Off:
Notes:
• The Direct Change setting can be set only when the
HDMI Control setting is set to On.
• When set to On, when playback is started on the
DV-CP706, it will automatically be selected as the
input source on an RIHD-compatible TV or AV
receiver.
• HDMI direct change only works with RIHD-compati-
ble components that support it and may not work prop-
erly with some components due to their settings or
compatibility.

Auto Power Off

The Auto power off function automatically turns off the
DV-CP706 after 20 minutes of inactivity.

Initial Setup Menu

This menu appears automatically the very first time you
turn on the DV-CP706. See "First Time Setup" on
page 23 for more information.
TV Shape—see page 44
HDMI Output Setting—see page 45
On-Screen Language—see page 47

Selecting Other Languages

This section explains how to select other languages for
disc menus, audio, and subtitles.
1
Select "Others" from the Disc
Menu Language, Audio Lan-
Remote controller
guage, or Subtitle menu, and
then press [ENTER].
The language code boxes appear.
2
Use the remote controller's Left/
Right [ ]/[ ] buttons to select the
Remote controller
code boxes.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
See adjacent table for language codes.
3
When you've finished, press the
[ENTER] button.
Remote controller
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-cp706

Table of Contents