Setting The Hdmi - Onkyo DV-CP706S Instruction Manual

Powering Up & Setting Up the DV-CP706—Continued
Your DV-CP706 is now ready for use. See page 25 for
information on loading discs, and page 26 for informa-
tion on selecting and playing discs.
Notes:
• You can cancel the Initial Setup by pressing the
OPEN/CLOSE [
later by using the on-screen setup menus (see
page 49).
• You can change the language of the on-screen setup
menus, and your preferred languages for DVD menus,
foreign language soundtracks, and subtitles individu-
ally on the Language page of the on-screen setup
menus (see page 47).
• Depending on the connected CEC-compatible TV,
some of the DV-CP706's settings may change when
RIHD is on.
• Not all DVD-Video discs have multi-language menus,
foreign language soundtracks, and subtitles. In such
cases, the disc's default language is used.

Setting the HDMI

This section explains how to turn HDMI on and off and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
1
Press the [RESOLUTION] button
to turn HDMI on or off.
If HDMI is off, "HDMI OFF" appears
on the display the first time the button is
pressed. Press the button again while
"HDMI OFF" is displayed to turn on
HDMI.
To turn off HDMI, press and hold the
[RESOLUTION] button.
24
] button, and complete the settings
RESOLUTION
2 While "HDMI ON" is displayed,
press the [RESOLUTION] button
Remote controller
on the remote controller repeat-
edly to change the HDMI resolu-
tion.
The fist button press displays the cur-
rent resolution on-screen. Press the but-
ton again while the resolution is
displayed to change the setting. The
DV-CP706 supports the following res-
olutions:
Auto:
The resolution is automatically set
to the native resolution of the TV
connected to the HDMI OUT.
480p(480p/576p):
The setting displayed depends on
the country in which you purchased
the DV-CP706.
×
720
50Hz
480i(480i/576i):
The setting displayed depends on
the country in which you purchased
the DV-CP706.
×
720
50Hz
720p:
1280
1080i:
1920
1080p:
1920
Tip:
These settings can also be changed by using the on-
screen setup menus (see page 45).
Note:
• Depending on your setup, you may find that there's no
picture when you turn on HDMI. In this case, you
need to check the HDMI resolution setting and your
TV's settings. If there is no picture, press the [RESO-
LUTION] button repeatedly until the picture reap-
pears.
×
480p 60Hz or 720 576p
×
480i 60Hz or 720 576i
×
720p 50/60Hz
×
1080i 50/60Hz
×
1080p 50/60Hz