Dv-Cp706; Powering Up The Dv-Cp706; First Time Setup - Onkyo DV-CP706S Instruction Manual

Powering Up & Setting Up the DV-CP706
ON/STANDBY
STANDBY indicator
ON

Powering Up the DV-CP706

Before connecting the power cord, connect all your AV
components (see page 18 to page 22).
Don't forget to turn on your TV or projector and select
the video input to which the DV-CP706 is connected.
If you're using a hi-fi amp, AV receiver, or surround
sound decoder for audio playback, turn that on as well
and select the audio input to which the DV-CP706 is
connected.
1
Connect the supplied power cord
to the DV-CP706's AC INLET.
2 Plug the other end of the power
cord into a suitable wall outlet.
The DV-CP706 enters Standby mode,
and the STANDBY indicator comes on.
When you disconnect the power cord,
always disconnect it from the wall out-
let first, and then the DV-CP706's AC
INLET.
3
Remote controller
STANDBY

First Time Setup

The very first time you turn on your DV-CP706, the Ini-
tial Setup menu appears on-screen, as shown.
ENTER
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting,
and select a language for the on-screen setup menus. You
can change these settings later by using the on-screen
setup menus (see page 43).
1
Remote controller
2
Remote controller
3
Remote controller
To turn on the DV-CP706, press
the [ON/STANDBY] button (or the
remote controller's [ON] button).
The DV-CP706 comes on, the display
lights up, and the STANDBY indicator
goes off.
To turn off the DV-CP706, press the
[ON/STANDBY] button (or the remote
controller's [STANDBY] button). The
DV-CP706 enters Standby mode and
the STANDBY indicator comes on.
Initial Setup
TV Shape
4:3 Letter box
HDMI Output Setting
4:3 Pan Scan
On-Screen Language
16:9 Widescreen
√ 16:9 Compressed
Use the remote controller's Up/
Down [ ]/[ ] buttons to select a TV
shape, and then press [ENTER].
See page 44 for more information on
the TV Shape options.
The HDMI Output Setting menu
appears.
Select a HDMI Output Setting
option, and then press [ENTER].
See page 45 for more information on
the HDMI output options.
The On-Screen Language menu
appears.
Select a language, and then
press [ENTER].
See page 47 for more information on
the language options.
The Initial Setup menu closes.
23