Installation; Receiver Location; Optional External Equipment; Ac Power Supply Cord - Panasonic 52DL52 - PT - 52" CRT TV Operating Instructions Manual

Operating instructions
Table of Contents

Advertisement

I Installation
Receiver Location
I
This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.
Locate for comfortable
viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
To ensure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronics supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you will need.
AC Power Supply Cord
CAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. De not use this
(polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure.
Safety
Precaution
Please take safety precautions
to prevent the unit from
falling over.
The unit may fall over during earthquakes, or if someone
stands on or shakes the projection TV.
Affixing to a wall
Use a strong rope or a chain (not included) to fasten the
projection TV firmly to a strong support such as a wall or
pillar.
Remote Control Battery Installation
Requires two AA batteries,
1.
Turn the Transmitter
face down.
Remove
top cover by pressing
down on marking and sliding cover
off in the direction indicated.
\
2.
Install the batteries as shown in
the battery compartment. (Polarity
+ or - must match the markings in
the compartment.)
Two AA size
3.
Replace the cover and slide in
reverse until the lock snaps.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-52dl52

Table of Contents