Wall.mounting.the.base - Uniden TRU9360 Owner's Manual

Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
) Snap.the.wall.mount.adapter.into.the.notches.on.the.base.top.
2) Plug.the.AC.adapter.into.the.DC.IN.9V.jack.
3) Wrap.the.AC.adapter.cord.inside.the.molded.wiring.channel.as.
shown.
4) Plug.the.AC.adapter.into.a.standard.20V.AC.wall.outlet.
5) Plug.the.telephone.cord.into.the.TEL.LINE.jack.
6) Plug.the.telephone.cord.into.the.telephone.outlet.
7) Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on.
the wall. Then push in and down until the phone is firmly seated.
Note:. DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch.
Wall plate Wall plate
AC outlet AC outlet
3
AC adapter AC adapter