Advertisement
2
Push the release latch, and then open the front cover.
3
Lift and pull the toner cartridge out of the printer.
Warning—Potential Damage: Do not touch the
photoconductor drum on the underside of the cartridge. Use the
cartridge handle whenever you are holding the cartridge.
4
Place the toner cartridge aside on a flat, smooth surface.
Warning—Potential Damage: Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage: The jammed paper may be
covered with unfused toner which can stain garments and skin.
5
Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Note: If the paper is not easy to remove, then open the rear door
and remove the paper from there.
6
Align and reinstall the toner cartridge.
7
Close the front cover.
8
Close the multipurpose feeder door.
9
Press
.
202 and 203 paper jams
If the paper is exiting the printer, then pull the paper out, and then
press
.
If the paper is not exiting the printer:
1
Pull down the top rear door.
2
Slowly remove the jammed paper to avoid tearing it.
3
Close the top rear door.
4
Press
.
241–245 paper jams
1
Pull out the tray indicated on the display.
2
2
Remove any jammed paper, and then insert the tray.
3
Press
.
4
If the jam message persists for a 250-sheet or 550-sheet tray, then
remove the tray from the printer.
5
Remove the jammed paper, and then insert the tray.
6
Press
.
Advertisement
