Indesit SAN 400 Manual page 16

If the appliance does not work, before calling for Assistance ( see Assistance ), check for a solution from the following list.
• Check if the malfunction can be solved on your own ( see Troubleshooting ).
• If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre
• type of malfunction
• appliance model (Mod.)
• serial number (S/N)
This information can be found on the data plate located
on the bottom left side of the refrigerator compartment.
• The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
• The door do not close properly or the seals are damaged.
• The door are opened too frequently.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position
• The refrigerator have been over-filled.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position.
• The food is in contact with the back inside wall of the refrigerator.
• The refrigerator door is open.
• The AIR system is only activated automatically when it becomes
necessary to restore perfect operational conditions inside the refrigerator
compartment.
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The appliance has not been installed on a level surface ( see Installation ) .
• The appliance has been installed between cabinets that vibrate and
make noise.
• The internal refrigerant makes a slight noise even when the compressor is
off. This is not a defect, it is normal.
• This shows the appliance is operating normally.
• The water discharge hole is blocked ( see Maintenance ).
RG 2330
Mod.
220 - 240 V-
340
Total
Gross
Bruto
Brut
Compr.
Syst.
Kompr.
Made in Italy 13918
TI 93139180000
Cod.
50 Hz 150 W Fuse
W
75
Net
Gross Gross
Bruto Util Bruto
Utile
Brut Brut
Pressure
Test
R 134 a
HIGH-235
P.S-I.
kg 0,090
LOW 140
S/N 704211801
A
Max 15 w
Freez. Capac Class
N
Poder de Cong Clase
4,0
Classe
kg/24 h