Removing The Computer Stand - Dell Precision D490 Quick Reference Manual

5 Align the center of the stand with the center of the computer.
6 Carefully, with the help of an assistant, tilt the computer backwards slightly- just high enough to slide
the stand beneath it.
7 Slide the rear of the stand into the rear foot of the computer, and ensure that the alignment guide
slides into place.
8 Center the front bar of the stand in the corresponding notch in the front foot of the computer.
9 Carefully set the computer back down; the front bar of the stand should snap into place under the
weight of the computer.

Removing the Computer Stand

CAUTION:
Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to
maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a two-man lift. Always
lift correctly to avoid injury; avoid bending over while lifting. See your Product Information Guide for other
important safety information.
28
Quick Reference Guide
1
2
1 computer
2 computer stand
3 alignment guide
3