BMW SERIE 7 2005 Owner's Manual page 87

Confirm to hide the display.
Displays after completion of trip
Selected fault reports generated during the
trip are shown consecutively when you
switch off the ignition.
If indicated, the following message may
also appear:
"Parking lamps on!"
This message appears when you open the
driver's door after parking. A supplemen-
tary gong is also heard.
Even with the ignition and Info Display off,
you can reactivate the screen and display
the messages.
Press the CHECK button for approx.
8 seconds, refer to page 84. The stored
status reports appear again in the display. If
several messages are present, you can
continue to briefly press the CHECK button
to view them in succession.
The Check Control function
>
cancels itself automatically after a brief
period
>
can be canceled by again pressing the
CHECK button for approximately
8 seconds.
You can select the language in which
Check Control status reports and
messages from the computer will appear,
refer to page 89.<
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG
Computer
Requesting functions
You can use the buttons in the turn signal
lever to request a display from the com-
puter on the Info Display, starting at the
radio mode in the ignition lock.
1 Info Display on left
2 Info Display on right
A new function appears each time you
briefly press the button.
Displays on Info Display
The display sequence:
>
Fuel gauge 86
>
Range and remaining distance 86.
The display sequence:
>
Odometer 81
85