BMW SERIE 7 2005 Owner's Manual page 137

Map-guided destination
selection
Assume that you only know the general
location of your destination's street or
locality. You also have the option of select-
ing the destination on a map using a target
cursor and importing it into the destination
guidance.
1. Select "With map" and confirm your
selection
In the Control Display, a map sec-
tion is displayed around the first
destination from the destination list,
even if the destination guidance system
is switched off.<
2. Turn the controller to adjust the scale
3. Move the controller in the desired direc-
tion to localize your destination.
If no further changes are made to the
map, after a brief pause the name of the
street or locality marked by the cursor
will appear on the screen
4. Press the controller to view other menu
items:
>
closes "With map"
>
"Next" changes back to "With map"
>
"Location" selects the current posi-
tion as the map's focus again
>
With "Save dest.", the address in the
target cursor can be applied into the
destination entry using "ROUTE
GUID." or stored in the address book
"AS ADDRESS". If the navigation
system is unable to identify a street
or town/city, your current map coor-
dinates will appear. In order to be
able to select this position as desti-
nation or to store it in the address
book as an address, a name must
first be entered, refer to "ABC...".
You can also use the destination
entry map without entering a town
or city if you wish to select a destination
and import it using the target
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG
Selecting destination via
"Information"
Assume that you are searching for a partic-
ular place within a town or city, such as a
hotel or restaurant, a filling station, the
nearest BMW center, tourist attractions,
a hospital.
1. Select "Information" and confirm your
selection
2. Select "On location" and confirm your
selection
3. Select the desired type of destination,
such as "Hotel / Motel" and confirm
your selection
4. A maximum of ten destinations now
appears on the right side of the Control
Display. These are listed by distance to
destination, while arrows also appear to
indicate their directions from your cur-
rent position
5. Select and confirm the destination
cursor.<
135