BMW SERIE 7 2005 Owner's Manual page 86

Table of Contents

Advertisement

problem is corrected. Supplementary infor-
mation is also shown on the Control Dis-
play, refer to Automatic display on Control
Display.
Priority 2:
These status messages and malfunction
reports appear on the Info Display for
approx. 20 seconds.
Briefly press the CHECK button on the turn
signal lever to cancel the message in the
display, if allowed by priority rating.
Requesting stored messages using Control
Center see there.
Check Control symbol and messages
on Control Display
Depending on the status of the mon-
itored systems, the Check Control symbol
is displayed in different colors.
Yellow or red
Faults are present in the monitored sys-
tems. Depending upon how serious the
problem is, a supplementary message may
also appear on the Control Display.
Requesting stored messages using Control
Center see there.
The symbol in the status line also indi-
cates the status of the service
requirement display, refer to page
84
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG
Automatic display on Control Display
These supplementary messages are
intended to assist you in assessing the
severity of malfunctions; they provide you
with the information you need to decide on
the best way to respond.
Select
switch off the display.
Requesting stored messages using
Control Center
1.
Select "Car data"
2.
Select
selection
3.
Select "Check" and confirm your selec-
tion
4.
The stored status reports appear on the
display. Select the desired report and
confirm your selection.
23.<
and confirm your selection to
and confirm your

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

745li745i760i760li

Table of Contents