Installing cases
7
74
Fully open latching flap 5, if ne-
cessary pulling up red release
lever 4.
z
Position the case in case car-
rier 6, then pivot it until it is
seated at mount 7.
Push latching flap 5 down as
far as it will go and hold it in
this position.
Push red release lever 4 down.
Latching flap 5 engages.
Close the carry handle.
Turn the key parallel with the
direction of travel and remove.
topcase
with topcase
OA
Opening topcase
Turn key 1 in the topcase lock
to the vertical position.
Press and hold down yellow
latch 2 and pull out carry
handle 3.