BMW F 800 GS Rider's Manual page 112

8
108
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
z
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
OE
Turn bulb 2 clockwise to install
OA
it in the bulb housing.
OE
OA