with centre stand
OE
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Install the front-wheel stand
(
103).
Slacken right axle clamping
screws 1.
Remove axle screw 2.
Slacken left axle clamping
screws 3.
Push the axle in as far as it will
go.
Remove axle 4, while support-
ing the wheel.
Do not remove the grease from
the axle.
Roll the front wheel forward to
remove.
8
97
z