BMW F 800 GS Rider's Manual page 110

8
106
Install cover 1 or cover 2, as
applicable.
Replacing parking-light
z
bulb
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 2.
Pull parking-light bulb 3 out of
the headlight housing.
Remove the bulb from the bulb
holder.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.