Symbols; Entering Dates Of Statutory Emissions Tests And Vehicle Inspections; Clock; Setting The Time - BMW 325I Owner's Manual

Select the entry and press the controller.
To exit from the menu:
Select the arrow and press the controller.

Symbols

No service is currently required.
The deadline for service or a legally man-
dated inspection is approaching. Please
arrange an appointment with your BMW center.
The service deadline has already passed.
Entering dates of statutory emissions
tests and vehicle inspections*
Make sure the date on the Control Display is
always set correctly, refer to page 72, as other-
wise the effectiveness of CBS Condition Based
Service is not ensured.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Service" and press the controller.
4. Select "Service requirements" and press
the controller.
5. Select "Status" and press the controller.
6. Select "Emission inspect." or "State
inspection" and press the controller.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
7. Select "Set service date" and press the
controller. The month is highlighted.
8. Turn the controller to make the adjustment.
9. Press the controller to apply the setting.
The year is highlighted.
10. Turn the controller to make the adjustment.
11. Press the controller to apply the setting.
The date entry is stored.
To exit from the menu:
Select and press the controller.
More information on the BMW Maintenance
System can be found on page 185.

Clock

Setting the time

In the instrument cluster
To set the 12h/24h mode, refer to Setting the
time format below.
71