Parking Lamps, Roadside Parking Lamps; Turn Signals, Front; Side-Mounted Turn Signals; Tail Lamps - BMW 325I Owner's Manual

3. Push the wire bracket to the side out of the
mounting, arrow 1, and fold it down,
arrow 2.
4. Remove the bulb.
5. Insert the new bulb.
6. Fold up the wire bracket and clamp it.
7. Connect the plug.
8. Reattach the cover.

Parking lamps, roadside parking lamps

5 watt bulb, W 5 W
1. Remove the cover for the high-beam head-
lamp.
2. Pull out the bulb holder, see arrow.
3. Remove and replace the bulb.
4. Insert the bulb holder.
5. Reattach the cover.

Turn signals, front

21 watt bulb, PY 21 W
or PY 21 W Silver Vision
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
1. Turn bulb holder 1 to the left and remove.
2. Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
3. Insert bulb holder 1.
4. Attach the flap to the wheel well.

Side-mounted turn signals

5 watt bulb, WY 5 W
or WY 5 W-ST (Silver Top)
1. Press back against the front edge of the
light with the tip of your finger, then pivot it
out.
2. Extract the bulb for replacement.
3. Insert the lamp.

Tail lamps

21 watt bulbs, P 21 W
The tail lamps are divided into two parts. One
part is in the luggage compartment lid, the other
is in the fender.
189