Seat And Mirror Memory; Automatic Call-Up; Manual Call-Up; Storing - BMW 325I Owner's Manual

Seat and mirror memory*

You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the seat back width and lumbar
support are not stored in memory.

Storing

1. Switch on radio readiness or the ignition,
refer to page 49.
2. Adjust the seat and exterior mirrors to the
desired positions.
3. Press the button.
The LED in the button lights up.
4. Press the desired memory key 1 or 2.
The LED goes out.

Automatic call-up

You can select when the memorized positions
of the driver's seat and exterior mirrors are to be
called up.
> Call-up when the vehicle is unlocked
> Call-up when the driver's door is opened.
When this Personal Profile function is
used, first ensure that the footwell behind
the driver's seat is free of obstacles. Failure to
do so could cause injury to persons or damage
to objects as a result of a rearward movement of
the seat.<
The adjusting procedure is immediately halted
when you press a seat adjustment switch or one
of the MEMORY buttons.
You can program this via iDrive:
iDrive concept, refer to page 16.
42
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Vehicle settings" and press the
controller.
4. Select "Door locks" and press the control-
ler.
5. Select "Central locking" and press the con-
troller.
6. Select "Last seat pos." and press the con-
troller.
7. Select "After unlocking" or "After door
opened".
8. Press the controller.

Manual call-up

Do not call up memory while you are driv-
ing, as unexpected seat movement could
result in an accident.<
Convenience mode
1. Unlock and open the driver's door or switch
on radio readiness, refer to page 49.
2. Briefly press the desired memory button 1
or 2.
The adjusting procedure is immediately halted
when you press a seat adjustment switch or one
of the MEMORY buttons.
Safety feature
1. Close the driver's door and switch the igni-
tion on or off, refer to page 49.
2. Press the desired memory button 1 or 2
and maintain pressure until the adjustment
process has been completed.