Displays On The Control Display; Resetting Values; Entering A Distance Manually; Trip Computer - BMW 325I Owner's Manual

Average fuel consumption
The average fuel consumption is calculated for
the time during which the engine is running.
With the trip computer, refer to page 66, you
can have the average consumption for another
trip displayed.
To reset average fuel consumption: press the
button in the turn indicator stalk for approx.
2 seconds.

Displays on the Control Display

You can also call up the computer via iDrive;
concept, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to call up
"Navigation".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination:
> Manually enter a distance in the com-
puter, refer to information further below
> Enter a destination in the navigation sys-
tem, refer to page
>
Cruising range
> Distance to destination:
>
Manually enter a distance in the com-
puter, refer to information further below
> Enter a destination in the navigation sys-
tem, refer to page
> Average speed
> Average fuel consumption
66
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
115
115

Resetting values

You can reset the values for average speed and
average consumption:
1. Select the respective menu item and press
the controller.
2. Press the controller again to confirm your
selection.

Entering a distance manually

1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance to
your destination.
3. Press the controller to apply the setting.
The distance is automatically entered during
destination guidance.

Trip computer

The trip computer is suitable e.g. for a holiday
trip.
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Trip computer" and press the con-
troller.
> Departure time