Recommended Drive Cable Connections
•
Connect serial ATA hard drives to connectors labeled "SATA0" or
"SATA1" on the system board.
•
Connect serial ATA CD or DVD drives to connectors labeled "SATA2" or
"SATA3" on the system board.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a
data cable—to the back of the drive.
1 power cable
Drive Interface Connectors
The drive cable connectors are keyed for correct insertion. Properly align the
cable connector key on the cable and the drive before connecting.
Power Connector
1
2
Serial ATA Connector
1
2
1 interface cable
2 power input connector
2 interface connector
Removing and Installing Parts
121