Printer Problems - Dell Inspiron DCMA Owner's Manual

I F T H E P O W E R L I G H T I S S T E A D Y A M B E R
malfunction.
• Ensure that the 12-volt power connector (12V) is securely connected to the system
board (see "System Board Components" on page 102).
• Ensure that the main power cable and front panel cable are securely connected to
the system board (see "System Board Components" on page 102).
F T H E P O W E R L I G H T I S B L I N K I N G A M B E R
I
power, a device might be malfunctioning or incorrectly installed.
• Remove and then reinstall the memory modules (see "System Board Components"
on page 102).
• Remove and then reinstall any cards (see "Cards" on page 111).
• Remove and then reinstall the graphics card, if applicable (see "Removing a
PCI/PCI Express Card" on page 116).
E L I M I N A T E I N T E R F E R E N C E
• Power, keyboard, and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet

Printer Problems

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer's
manufacturer.
C H E C K T H E P R I N T E R D O C U M E N T A T I O N
setup and troubleshooting information.
N S U R E T H A T T H E P R I N T E R I S T U R N E D O N
E
— Power problem or internal device
— The computer is receiving electrical
— Some possible causes of interference are:
— See the printer documentation for
Solving Problems
67