Recommended Drive Cable Connections
•
Connect serial ATA hard drives to connectors labeled "SATA0" or "SATA1"
on the system board.
•
Connect serial ATA CD or DVD drives to connectors labeled "SATA4" or
"SATA5" on the system board.
NOTE:
SATA 4 and SATA 5 are not supported on Inspiron 530b/530d.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a
data cable—to the back of the drive.
1
Drive Interface Connectors
The drive cable connectors are keyed for correct insertion. Properly align the
cable connector key on the cable and the drive before connecting.
1
1
2
power cable
Serial ATA Connector
1
2
interface cable
Power Connector
2
power input connector
2
interface connector
Removing and Installing Parts
139