Setting Up The Printer Web Page - Minolta MAGICOLOR 2 Manual

Setting up the printer web page to run on your intranet involves two
basic steps:
n
Assigning a name to your printer
n
Setting up the "no proxy" preferences in your browser software
The printer web page can be accessed only through the assigned
name of the printer or the IP address. It is more convenient for you to
use a name than the address. The default name for the printer is usu-
ally the model number of the printer, for example, QMS magicolor 2
Print System. Change the default name to one that is more easily
remembered and typed.
You can change the printer name through the Administration/Commu-
nications/Network x /CrownNet/NetWare/Printer Name menu or the
Administration/Communications/Network x /CrownNet/LanManager/
Printer Name menu. (See the QMS CrownNet Setup Guide for more
information.)