Using Labels - Minolta MAGICOLOR 2 Manual

Formatting
Input
Type
Notes
1 Load labels the same way you load paper.
Note: If your label stock has a top-of-page, place the top-of-page
»
toward the rear of the printer.
2 In the Operator Control/Media/For Upper Bin menu, select
Thick Stock.
Formatting
Input
Type
Notes
Format label data within your application. Try printing your data
on a plain sheet of paper first to check placement.
Source Upper cassette
Capacity Up to 50, depending on the thickness of the labels
Refer to the specifications in chapter 2, "Print Media," in the
Reference
n Avoid using labels with exposed adhesive; it may stick to
the toner cartridge or the fixing roller, causing labels to peel
off and media jams to occur.
n Check your application documentation for other information
on printing labels.
Format letterhead or memo data within your application. Try print-
ing your data on a plain sheet of paper first to check placement.
Source Upper cassette
Capacity Up to 250 sheets, depending on the thickness of
the media
Refer to the specifications in chapter 2, "Print Media," in the
Reference
n Check your application documentation for other information
about printing on letterhead and memo media.