Table of Contents
Advertisement
Use the following procedure to check and adjust the color density.
Caution : For best results when checking the printer's color density,
print the calibration page described in step 3 on good quality paper,
such as Hammermill LaserPrint Radiant White or Weyerhauser First
Choice premium paper. Otherwise, the color of the paper could affect
the results.
1
Set the density of each color to 0.
a
Access the printer's Administration/Engine/Density/Cyan menu.
b
Set the cyan color density to 0.
Press the Previous key to decrease the density setting or the
Next key to increase the setting.
c
Repeat steps a and b for the magenta, yellow, and black color
densities.
d
Save your changes.
2
Access the printer's Administration/Special Pages/Calibra-
tion Page menu.
3
Press Select to print a calibration
page.
This page provides a density range
for each of the printer's colors—
cyan, magenta, yellow, and black.
Advertisement
Table of Contents
