Focus Lock; Using The Built-In Flash; Flash Signals - Minolta DYNAX 5 Instruction Manual

Hide thumbs Also See for DYNAX 5:
Table of Contents

Advertisement

FOCUS LOCK

The focus-lock function is used when the
subject is off-center and outside the focus
frame. Focus lock may also be used when
a special focusing situation prevents the
camera from focusing on the subject.
• Focus lock cannot be used with
continuous AF. The spot AF button (p.69)
can also be used for focus lock.
• Focus can be locked in continuous AF
(p.73) with the spot AF button.
1
• When
• Focus lock also sets the exposure
2
3
• Removing your finger off the shutter-
34
Center your subject in the wide
focus frame
, then press
the shutter-release button
partway down to lock the
focus.
appears in the viewfinder, the
focus is locked.
settings.
Continue to hold the shutter-
release button partway down
while you compose your
picture.
Press the shutter-release
button the rest of the way
down to take the picture.
release button cancels focus lock.

USING THE BUILT-IN FLASH

When
appears in the viewfinder in full-auto, the built-in flash pops-up
automatically when the shutter-release button is pressed partway down.
Once the flash is up, it will fire when necessary.
• The shutter will not release until the flash is charged.
• To turn off the autoflash, select flash cancel
• Pressing the program-reset button resets the flash to autoflash mode.
• Push down the built-in flash when the camera is not in use.

Flash Signals

Flash signals in the viewfinder indicate
the status of the flash.
Action
Signal
Composing the
Steady
picture
Pressing the
Built-in flash
pops-up
shutter-release
Eye-start
button
Disappear
ON
partway
down
Steady
After taking the
picture
Blinks
Pressing the
Built-in flash
pops-up
shutte- release
button partway
Disappears
Eye-start
down
OFF
Steady
After taking the
Blinks
picture
• When
does not blink after taking the picture, the subject was not within
the flash range. Please check the flash range on the next page.
.
Indicated Flash Status
Flash is needed.
s
Flash is charging.
Flash is ready.
The flash exposure was
confirmed.
Flash is needed.
Flash is charging.
Flash is ready.
The flash exposure was
confirmed.
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxxum 5

Table of Contents