5 Gently slide the new drive (second hard drive) into place until you hear a click or feel the
drive securely installed.
secondary hard
drive in lower bay
primary hard drive
in upper bay
6 Connect a power cable to the drive.
7 Connect the data cable to the drive and to the system board (see page 61).
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before removing the cover.
Follow the procedures in "Before You Begin" on page 53.
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 87.
Removing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 53."
2 Remove the drive panel (see page 76).
rail tabs (2)
hard drive bay
Removing and Installing Parts
85