Belkin P73783AEN User Manual page 25

USING YOUR MATRIX2
On-Screen Display Menu Control:
To access the "On-Screen Display" (OSD) menu, press "Scroll Lock",
"Scroll Lock", and the space bar. Immediately, the OSD overlay screen
will appear. The superimposed menu screen is generated by the MATRIX2,
and does not affect your computers or software function in any way.
The main OSD menu is shown (on the right). It shows the current selected
BANK. If you have only one MATRIX2, it will display "BANK 00".
A " " symbol indicates that the computer connected to that port is
powered.
If a computer is connected and powered up, but the OSD menu does not
display a " " symbol, you will have to reset the MATRIX2 to re-detect the
powered computer. This is done by simultaneously pressing the "BANK
up" and "BANK down" buttons on the front panel.
Note: "Scroll Lock", "Scroll Lock", "DELETE" will reset the OSD setting
to factory default.
An arrow icon indicates the current active port.
(__): SELECT: Navigate to different computers in the same BANK.
(PGUP/DN): BANK: Select previous BANK by "Page Up" and next BANK
by "Page Down".
(INS): RENAME: Press the "Insert" key to name each computer by port (up
to 15 characters).
(ENTER): SELECT/SAVE: Select a port and also save the content inputted
when renaming the port.
(TAB): SETUP: Open "Setup" menu.
(ESC): EXIT: Exit the On-Screen Display.
The Setup menu allows you to set the AutoScan time and OSD time. The
Setup menu can be accessed by pressing the "Tab" key while in the main
OSD menu.
23