Table of Contents
Advertisement
USING YOUR MATRIX2
Keyboard Hot Key Commands:
You can also conveniently command the MATRIX2 to switch ports
through simple keyboard key sequences. To send commands to the
MATRIX2, the "Scroll Lock" key must be pressed twice within two
seconds. You will hear a beep for confirmation. Below are the different
commands:
Note:
You will have approximately five seconds to complete each hot
key sequence.
SL
SL
Up Arrow
SL
SL
Down Arrow
SL
SL
Page Up
SL
SL
Page Down
SL
SL
Y
SL
SL
X
Y
(Daisy-Chain Configuration)
SL
SL
Delete
SL
SL
S
SL
SL
Space bar
SL
SL
A
You can switch directly to any port by selecting the appropriate BANK
and port numbers. For instance, if you press "Scroll Lock", "Scroll Lock",
"03", "05", the computer on port 5 of the MATRIX2 that is set to BANK
03 will be selected.
Switch to PREVIOUS ACTIVE port
Switch to NEXT ACTIVE port
Switch to PREVIOUS BANK
(By default, selects first active port on the BANK)
Switch to NEXT BANK
(By default, selects first active port on the BANK)
Directly switches to PORT Y on BANK 00
(Single-Switch Configuration) Y=01 to 16
Directly switches to PORT Y on BANK X
(X=00 to 15) (Y=01 to 08 for F1DM208T)
(X=00 to 15) (Y=01 to 16 for F1DM216T)
Reset OSD to factory default
Disable sound in AutoScan mode
Activate On-Screen Display
Enable AutoScan mode
22
Advertisement
Table of Contents
