Insignia IS-TV040921 Owner's Manual page 9

- REAR PANEL -
18.
SETUP Button
[P.26]
Press to enter or exit the setup menu of TV or
DVD.
19.
TITLE Button
[P.20]
Displays the title menu.
20.
CLEAR Button
[P.22]
Press to clear or cancel a setting currently
entered.
21.
MODE Button
[P.23, 24, 25]
Press to call up the program screen or the ran-
dom screen in the stop mode.
Press to call up the Black Level Setting screen or
the Virtual Surround screen during playback.
22.
SEARCH MODE Button
Press to locate a desired point.
23.
AUDIO Button
[P.24]
Press to select a desired audio language or sound
mode.
24.
SUBTITLE Button
[P.24]
Press to select a desired subtitle language.
25.
REPEAT Button
[P.23]
Repeats playback of the current disc, title, chap-
ter, or track.
26.
ANGLE Button
[P.24]
Press to change the camera angle to see the
sequence being played back from a different angle
(if available).
27.
A-B Button
[P.23]
Repeats playback of a selected section.
28.
RETURN Button
[P.22]
Returns to the previous screen in the setup menu.
29.
ENTER Button
[P.15]
Press to accept a setting.
NOTE:
•
We do not recommend the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
ANT.
COAXIAL
36 37 38
[P.22]
30. / / { / B
K L Buttons
TV Mode:
[P.13]
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
[P.20]
Press to select a menu item.
31.
DISC MENU Button
Calls up the DVD menu.
32.
REV Button
h
Press to view the DVD picture in fast reverse or
slow reverse motion.
FWD Button
g
Press to view in fast or slow forward motion.
33.
ZOOM Button
[P.21]
Enlarges part of a DVD-reproduced image.
34.
MUTE Button
[P.13]
Mutes the sound. Press it again to restore sound.
35.
SELECT Button
Press to change to TV mode, external input mode
or DVD mode.
36.
COAXIAL Jack
[P.11]
Connect to the digital input of an external
amplifier or decoder (for DVD Audio only).
37.
ANT(ENNA). Jack
Connect to an antenna, cable system or satellite
system.
38.
Power cord
[P.13]
Connect to a standard AC outlet (120V/60Hz).
NOTE:
•
Remove the power cord from the hook to avoid
breaking a wire before you connect to a stan-
dard AC outlet.
- 9 -
[P.20]
[P.21]
[P.21]
[P.11]
[P.10]
EN