Pc Card Slots; Inserting A Pc Card - NEC VERSA NOTE Manual

Table of Contents

Advertisement

T
Multimedia
T
Audio

PC Card Slots

Your NEC Versa Note has two Cardbus slots for inserting two PC or
Cardbus cards. The slots support two Type II cards or one Type III PC
card.
Using the system's PC card slots, you can add optional PC cards and
connect external devices to your NEC Versa Note. These devices include
peripheral devices, such as modems, LAN cards, and storage cards.

Inserting a PC Card

Follow these steps to insert a PC card in your system.
Some PC cards require additional system
resources. Before inserting a PC card you may have
to disable either the IR port, USB port, or the 56K
internal modem. Check the Windows device
manager to ensure that one of these devices is
disabled before inserting a PC card.
For information about enabling and disabling
devices on your NEC Versa Note, see "Enabling and
Disabling Devices," later in this chapter.
Align the card so that the 68-pin connector points towards the slot
1.
and the arrow on the PC card faces up.
2.
Slide the card into either slot. A low tone followed by a high tone
lets you know that the card is fully inserted and recognized. (If you
turn off the sound, no sound is emitted.)
4-14 Using Your NEC Versa Note
for combining animation and sound
to enable the use of sound.
CAUTION

Advertisement

Table of Contents
loading

Table of Contents