When Battery Power Is Low - NEC VERSA NOTE Manual

4. Align the terminals on the new battery with the terminal connector in
the bay. Insert the battery into the bay, until the battery bay latch
locks the battery in place.
5. Press down on the battery to secure the terminal connection.
6. Turn the system over and press the Power button to power on the
system.

When Battery Power is Low

When battery power gets low, connect your system to the AC adapter. If
an AC adapter is not available, change the battery pack using the
Replace Battery Pack procedure. See the section, "Replacing the Battery
Pack."
To prevent accidental battery ignition or explosion,
adhere to the following:
Keep the battery away from extreme heat.
Keep metal objects away from the battery terminals
to prevent a short circuit.
Make sure the battery is properly installed in the
battery bay.
Read the precautions printed on the battery.
1-18 Getting Started
WARNING