Dell XPS M2010 Owner's Manual page 116

9 On the Select Member Hard Drive screen, double-click the hard drive to select the member drive to
span the array and click Next.
10 For RAID 0, on the Specify Volume Size screen, select the Volume Size you want, and click Next.
For RAID 1, skip to step 11.
NOTE:
In the following step, you will lose all data contained on the member drive.
11 Click Finish to start migrating, or click Back to make changes. You can use your computer normally
during the migration process.
Rebuilding a Degraded RAID Level 1 Configuration
If your computer has reported a degraded RAID level 1 volume, contact Dell about replacing your hard
drive. See "Contacting Dell" on page 150.
You can manually rebuild the computer's redundancy mirror to a new hard drive by performing the
following steps:
1 Click the Start button and point to All Programs→ Intel Matrix Storage Manager → Intel Matrix
Storage Console to launch the Intel Storage Console.
2 Right-click the available hard drive to which you want to rebuild the RAID level 1 volume, and click
Rebuild to this Disk.
You can use your computer while the computer is rebuilding the RAID level 1 volume.
116
System Setup Program