NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual page 45

2-6 Setup and Operation
n
To operate your speakers, turn on your system.
Push the power button on the front of the right speaker.
Turn on your audio source.
Adjust the volume by turning the volume control on the front of the right
speaker.
Adjust the bass and treble controls on the front of the right speaker to the
desired levels.
4. Assemble and connect the microphone (multimedia systems only) as follows.
n
Insert the microphone holder into the slot in the microphone stand (see Figure
Section 2-7). Push the holder all the way into the slot.
Figure Section 2-7 Inserting the microphone holder into the stand
n
Insert the microphone into the holder as follows (see Figure Section 2-8):
Place the microphone cable into the slot in the microphone holder.
Slide the microphone into the holder.
NOTE: Headphones can be connected to the
jack in the front of the right speakers.