NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual page 120

1. Remove the system unit cover as previously described (see "System Unit Cover
Removal" in this section).
2. Locate the SIMM sockets (see Figure Section 5-4).
Figure Section 5-4 System Board Upgrade SIMM Sockets
Press the metal clips at the outer edges of the socket away from the SIMM.
3.
4. Push the SIMM away from the locking tabs (tilt the SIMM forward) and remove
it from the socket (see Figure Section 5-5).
5. Repeat steps 3 and 4 for each SIMM being removed.
Repair 5-5