NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual page 42

3. If installing a multimedia system, connect the speakers as follows.
n
Locate the speaker with the control knobs. This is the right speaker.
n
Identify the cables that came with your speakers (see Figure Section 2-3). The
left speaker cable has a black connector on each end. The other cable is a Y-
cable. The Y-cable has a red and white connector at one end and a black
connector with two rings on the other end.
Figure Section 2-3 Speaker Cables
n
Attach the left speaker cable (with the black connectors at each end) to the
speaker as follows (see Figure Section 2-4).
Insert one end of the speaker cable into the jack marked "LEFT SPEAKER
INPUT" on the back of the left speaker.
Insert the other end of the speaker cable into the jack marked "L
SPEAKER OUTPUT" on the back of the right speaker.
Setup and Operation 2-3