Battery Status - NEC Dterm DTL-8R-1 Owner's Manual

Document Revision 1
___________________________________________________________________________________
2.9
2.10
___________________________________________________________________________________
6 - 12
2.8.3 While Talking
If the Handset cannot receive a signal from the Base Station in about
five seconds, it goes to Standby Mode and emits an error tone. In
this case, the LCD displays the following message. If the base
cannot receive a signal from the Handset in about five seconds, it
goes to Standby Mode.
Low Battery
The Handset has visual and audible indicators to warn of a low-battery
condition.
2.9.1 In Standby Mode
The Battery Status icon in the LCD changes to battery low.
The "Charge Battery" message blinks on the LCD (ON: 600msec,
OFF: 600msec).
2.9.2 In Talk Mode
The Battery Status icon in the LCD changes to battery low.
The Handset remains in Talk Mode and the battery low alert tone is
emitted every 30 seconds.
2.9.3 In Other Mode (Excluding Standby Mode and Talk Mode)
The Battery Status icon in the LCD changes to battery low.

Battery Status

The LCD indicates the battery capacity as indicated in the diagram below.
O u t o f R a n g e
term
D Cordless DECT
Setup and Operation