Auto Profile Selection Management - SMC Networks WUSB-N2 - annexe 2 Manual

3.2.7 Auto Profile Selection Management

The auto selection feature allows the adapter to automatically select a profile from the list of
profiles and use it to connect to the network. To add a new profile into the Auto Selected
Profiles list, please follow these steps.
1. On the Profile Management screen (Figure 3-2), click Order Profiles....
2. The Auto Profiles Selection Management window will appear (Figure 3-11) with a list of
created profiles in the Available Profiles section.
3. Highlight the profile to add to Auto Selected Profiles and click Add. The profile will appear
in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab (Figure 3-2).
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the adapter will scan for an available network. The profile with the highest
SMCWUSB-N2 802.11n Wireless USB 2.0 Adapter
Figure 3-11
20