SMC Networks WUSB-N2 - annexe 2 Manual page 21

you will see the Management dialog box (Figure 3-3).
1. Configure the General tab
Profile Name - Enter the Profile name which identifies the configuration profile. This name
must be unique. Note that the profile names are not case-sensitive.
Client Name - Enter the Profile name which identifies the client machine.
Network Names (SSIDs) - Enter the SSID or the name of the Wireless Network you wish
to connect to. This field allows a maximum limit of 32 characters.
2. Configure the Security tab
Click the Security tab to configure the security settings of the profile. To define the security
mode, select the radio button of the desired security mode as follows.
Note:
You must configure the security type and password to be the same as what is set up on your
wireless router or access point. If you wish to connect to a wireless network that is secured (with
password), please first gather the security type and password set up on your wireless router or
access point.
SMCWUSB-N2 802.11n Wireless USB 2.0 Adapter
Figure 3-3
13