SMC Networks WUSB-N2 - annexe 2 Manual page 22

WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase (Recommended for
maximum security)
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both
the access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click Configure to fill in the Define Shared Keys window (shown in Figure
3-5).
None: No security (not recommended).
Note:
1. The WEP security mode is not available for 802.11n.
2. If the access point which the Adapter is associated has WEP set and the client has WEP
enabled, make sure that Allow Association to Mixed Cells is checked on the Security tab to
allow association. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile Management
dialog.
SMCWUSB-N2 802.11n Wireless USB 2.0 Adapter
Figure 3-4
14