Table of Contents
Advertisement
C
ONFIGURING THE
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to
be used by the Barricade and all of its wireless clients. Be sure you
configure all of its clients to the same values.
Parameter
Wireless Channel The radio channel used by the wireless router and its clients to
Extension
Channel
SSID
Wireless Mode
4-26
B
ARRICADE
Description
communicate with each other. This channel must be the same
on the Barricade and all of its wireless clients.
The Barricade will automatically assign itself a radio channel, or
you may select one manually.
Setting the Bandwith Mode as 20/40MHz allows you to use this
extension channel as the secondary channel for doubling the
bandwith of your wireless network.
Service Set ID. The SSID must be the same on the Barricade
and all of its wireless clients. (Default: SMC)
This device supports 11n, 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that
you have. SMC recommend using "Mixed 802.11n, 802.11g and
802.11b" to provide compatibility with 11n, 11g and 11b
wireless clients.
Advertisement
Table of Contents
