Dell PP29L Owner's Manual page 83

U X I L I A R Y D E V I C E F A I L U R E
A
For an external mouse, check the cable connection. Enable the Pointing Device
option in the system setup program (see "Using the System Setup Program"
on page 141). If the problem persists, contact Dell (see "Contacting Dell" on
page 132).
B A D C O M M A N D O R F I L E N A M E
correctly, put spaces in the proper place, and used the correct pathname.
C A C H E D I S A B L E D D U E T O F A I L U R E
microprocessor has failed. Contact Dell (see "Contacting Dell" on page 132).
CD D R I V E C O N T R O L L E R F A I L U R E
commands from the computer (see "Drive Problems" on page 79).
The hard drive cannot read the data (see "Drive Problems" on
D A T A E R R O R —
page 79).
D E C R E A S I N G A V A I L A B L E M E M O R Y
faulty or improperly seated. Reinstall the memory modules and, if necessary,
replace them (see "Memory" on page 116).
I S K F A I L E D I N I T I A L I Z A T I O N
D C :
hard drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 75).
D R I V E N O T R E A D Y
can continue. Install a hard drive in the hard drive bay (see "Hard Drive" on
page 109).
E R R O R R E A D I N G P C M C I A
ExpressCard. Reinsert the card or try another card (see "Using Cards" on
page 61).
E X T E N D E D M E M O R Y S I Z E H A S C H A N G E D
NVRAM does not match the memory installed in the computer. Restart the
computer. If the error appears again, contact Dell (see "Contacting Dell" on
page 132).
H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N D R I V E
T
that you are trying to copy is too large to fit on the disk, or the disk is full. Try
copying the file to a different disk or use a larger capacity disk.
A F I L E N A M E C A N N O T C O N T A I N A N Y O F T H E F O L L O W I N G C H A R A C T E R S
Do not use these characters in filenames.
> | —
G A T E A 2 0 F A I L U R E
modules and, if necessary, replace them (see "Memory" on page 116).
The touch pad or external mouse may be faulty.
—
Ensure that you have spelled the command
—
—
The CD drive does not respond to
—
—
The hard drive failed initialization. Run the
—
The operation requires a hard drive in the bay before it
—
The computer cannot identify the
C A R D —
A memory module may be loose. Reinstall the memory
—
The primary cache internal to the
One or more memory modules may be
The amount of memory recorded in
—
The file
—
: \ / : * ? " <
Troubleshooting
83