Optical Drive
CAUTION:
safety instructions in the Product Information Guide.
Removing the Optical Drive
1 Follow the procedures in "Before You Begin" on page 107.
2 Turn the computer over.
3 Remove the locking screw from the optical drive.
4 Using a plastic scribe, push the notch to release the optical drive from the bay.
5 Slide the optical drive out of the bay.
1
1
optical drive
Replacing the Optical Drive
1 Slide the optical drive into the bay.
2 Replace and tighten the locking screw.
112
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
2
2
locking screw
3
3
notch