Table of Contents
Advertisement
enter the PIN value of the adapter shown in Figure 6-6, click Connect.
4.
When Figure 6-5 appears, the WPS configuration is complete.
6.2.2 Enter the PIN from your AP device
1.
Open the WPS Utility and you will see Figure 6-3 . Click Next to continue. Then Figure 6-9 will
appear. Select the third option and enter the PIN value which is generally labeled on the
bottom of the router. Click Next.
2.
When Figure 6-5 appears, the WPS configuration is complete.
Note:
If you generate a new PIN code for your Router, please enter the new one instead.
PW-DN481D
150Mbps Wireless Lite-N PCI-E Adapter
Figure 6-8
Figure 6-9
37
Advertisement
Table of Contents
